Embedded Files
2025
2025 Korean Society of Mechanical Engineers (KSME) CAE and Applied Mechanics Division Spring Conference
Grand Hyatt Jeju, Jeju, Jeju Special Self-Governing Province
(2025.04.16.~19.)
"반도체 패키징 RDL 도금 공정 해석 연구"
- Sangyuen Park, Sangmin Cho, Jeongwoo Park and Hongyun So (Poster)
"시뮬레이션을 활용한 습식 식각 공정 예측 연구"
- Hyemin An, Sangyuen Park, Hoonhee Jang and Hongyun So (Poster)
2025 Korea institute for Structural Maintenance and Inspection Spring Conference
Grand Hyatt Jeju, Jeju, Jeju Special Self-Governing Province
(2025.04.09.~11.)
"다기능 콘크리트 제작을 위한 나노 소재 혼입 수용액의 분산도 평가 방법"
- Doheon Koo, Sooheon Kim and Hongyun So (Oral)
2025 Spring Conference of the Korean Sensors Society
ST Center, Seoul
(2025.04.02.~03.)
"Hydrogel-Basd Wearable Sensor for Erectile Dysfunction Diagnosis"
- Jongwon Kim, Junho Kim and Hongyun So (Poster)
2025 SMNS (Society of Micro and Nano Systems) Spring Conference (The 27th Korean MEMS Conference)
International Convention Center Jeju, Seogwipo, Jeju Special Self-Governing Province
(2025.03.26.~28.)
"섬유성 하이드로겔 센서를 활용한 손가락 동작 모사 로봇 제어"
- Junho Kim, Animesh Sinha and Hongyun So (Poster)
"FDM 타입 3D 프린팅 기반 압력 센서의 출력 변수가 민감도에 미치는 효과 분석"
- Junyoung Park and Hongyun So (Poster)
"SWCNT/PEDOT:PSS 폴리머 매트릭스를 활용한 압력 센서 개발"
- Jaeheon Jeong, Yulim Seol, Yeeun Kim and Hongyun So (Poster)
"Ppy@PU 폼 기반 다공성 구조를 활용한 민감도 높은 압저항 압력센서 제작"
- Yulim Seol, Jaeheon Jeong, Yeeun Kim and Hongyun So (Poster)
"YOLO-엣지 검출 기법을 활용한 SEM 이미지 필러 형상 분석"
- Jinan Jeong, Jongwon Kim and Hongyun So (Poster)
"FDM 3D 프린팅과 더블 캐스팅을 활용한 크랙 기반 스트레인 센서의 간단한 제작"
- Hoonhee Jang and Hongyun So (Poster)
The Korean Institute of Communications and Information Sciences (KICS) Winter Conference 2025
Yong Pyong Resort, Pyengchang, Gangwon-do
(2025.02.05.~07.)
"에너지 효율 향상을 위한 이방성 미세 구조 기반 웨이퍼 처리 소프트 액추에이터 제작에 관한 연구"
- Sooheon Kim, Jongwon Kim, Sangbo Seo and Hongyun So (Oral)
"FDM-type 3D 프린팅 기술을 활용한 고민감 유연 압력 센서의 에너지 절감 제작 기술"
- Junyoung Park, Wanki Park and Hongyun So (Oral)
2024
The 2nd International Symposium of Micro & Nano Manufacturing (ISMNM 2024)
Ramada Plaza Jeju, Jeju, Jeju Special Self-Governing Province
(2024.12.11.~14.)
"Defect mitigation in the electroplating process for micro-scale copper sturctures"
- Sangyeun Park, Doheon Koo, Yeongu Choi, Junyoung Park and Hongyun So (Poster)
7th International Conference on Materials and Reliability (ICMR-2024)
The Westin Josun Busan, Busan
(2024.12.03.~06.)
"Study on Evaluation Method of Dispersion Reliability of Graphene Oxide / Carbon Nanotube / Nano Silica Suspension"
- Doheon Koo, Sooheon Kim and Hongyun So (Oral)
"Superhydrophobic Sponge Sensor for Water-Level Detection based Underwater Vibration and Inclination Monitoring"
- Joohyung Bang and Hongyun So (Oral)
"Flexible Piezoresistive Pressure Sensor with Gradient Pore Density Sponge Structure Using FDM-type 3D-Printing Technology"
- Junyoung Park, Byungkwon Chun and Hongyun So (Oral)
The 9th Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2024)
Ningbo, China, Shangri-La Ningbo
(2024.11.27.~30.)
"Fabrication of capacitive pressure sensor with iron-free artificial cilia using magnetic field"
- Keuntae Baek, Joohyung Bang and Hongyun So (Poster)
"Superhydrophobic spnoge sensor for water-level sensing and complex underwater environments vibration monitoring"
- Joohyung Bang and Hongyun So (Poster)
2024 Korea Society of Die & Mold Engineering (KSDME) Fall Conference
Korea Society of Die & Mold Engineering, Siheung, Gyeonggi-do
(2024.11.21.~22.)
"Mechanism of anisotropic structure formation utilizing overcuring in DLP 3D printing"
- Jongwon Kim and Hongyun So (Oral)
"A study on flexible pressure sensors based on gradient pore density Ppy/PDMS sponge for enhanced sensitivity and sensing range"
- Byunkwon Chun, Junyoung Park, Joohyung Bang and Hongyun So (Oral)
"Fabrication and application of SWCNT/PEDOT:PSS/TPU-based CPCs according to fraction ratios"
- Yeongu Choi and Hongyun So (Oral)
"Development of temperature sensors based on TPU/SWCNT/PEDOT:PSS composite utilizing negative temperature coefficient effect"
- Minhyeok Kim, Yeongu Choi and Hongyun So (Poster)
"Facile fabrication for flexible pressure sensor using FDM-type 3D printing technology"
- Junyoung Park and Hongyun So (Poster)
2024 Korean Institute of Communications and Information Sciences Fall Conference
Lahan Select Gyeongju, Gyeongju, Gyeongsangbuk-do
(2024.11.20.~22.)
"인공지능 및 3D 프린팅을 활용한 열식 유량센서 제작 방법"
- Sanghun Shin, Keuntae Baek, Yeongu Choi and Hongyun So (Oral)
2024 Korea Concrete Institute Fall Conference
Del Pino Resort, Seorak, Gangwon-do
(2024.11.06.~08.)
"다기능 콘크리트 제작을 위한 나노 물질 혼입 방법"
- Doheon Koo, Sooheon Kim and Hongyun So (Oral)
The 22nd International Symposium on Microelectronics and Packaging (ISMP) joined with the 18th International Conference Reliability and Stress-Related Phenomena in Nanoelectronics (IRSP)
Paradise Hotel Busan, Busan
(2024.11.06.~08.)
"Analysis of Electrodeposition Process for Cu Microstructure"
- Hongyun So (Special Session)
2024 Korean Society of Mechanical Engineers (KSME) Fall Conference
International Convention Center Jeju, Seogwipo, Jeju Special Self-Governing Province
(2024.11.06.~08.)
"고선형성, 고민감도의 특징을 갖는 자기장을 활용한 마이크로 구조 기반 이온트로닉 압력 센서 개발"
- Keuntae Baek, Joohyung Bang and Hongyun So (Oral)
"In-operando lithium-ion battery state diagnosis using highly compressible piezoresistive battery swelling sensor"
- Joohyung Bang, Byungkown Chun, Minhyeok Kim, Jaeyoung Lim, Yongha Han and Hongyun So (Oral)
"Biomimetic soft functional organic-inorganic ionic hydrogel fiber for sensory human-machine interface applications"
- Animesh Sinha and Hongyun So (Poster)
"Fabrication method of organic ionic liquid based self-healed conductive hydrogel"
- Junho Kim, Animesh Sinha and Hongyun So (Poster)
"Real-time prediction of air-conditioning outdoor unit temperature using CFD-based data-driven CNN model"
- Junyoung Park, Doheon Koo, Jinan Jeong, Yoosuk Byon, Jinsung Lim, Myunghwan Choi, Jay J. Kim and Hongyun So (Poster)
"Facile micro fabrication of gripper inspired by gecko using DLP-type 3D printing technology"
- Sooheon Kim, Jaebum Sung, Doheon Koo, Sangbo Seo and Hongyun So (Poster)
"Effect of spin coating RPM on SU-8 film thickness for high-aspect-ratio microstructures"
- Jaeheon Jeong, Yulim Seol and Hongyun So (Poster)
"Development of perforated porous PDMS Sheets with high aspect ratio microstructures"
- Yulim Seol, Jaeheon Jeong and Hongyun So (Poster)
The 28th International Conference on Miniaturized System for Chemistry and Life Science
(MicroTAS 2024)
Montreal Convention Centre, Montreal, Canada
(2024.10.13.~17.)
"Water/Oil Multi-Phase Flow in Microchannel with Helical Corrugation Surface Using DLP 3D Printing Technology"
- Doheon Koo and Hongyun So (Poster)
"Analysis of electroplating process conditions for microscale copper structure fabrication"
- Sangyuen Park, Byungkwon Chun, Doheon Koo and Hongyun So (Poster)
"Biomimetic Soft Functional Ionic Gel Fiber for Smart Wearable Strain Sensor Human-Machine Interface Application"
- Animesh Sinha, Junho Kim, Sangyeun Park, Doheon Koo and Hongyun So (Poster)
The 24th International Meeting on Information Display (IMID 2024)
International Convention Center Jeju, Seogwipo, Jeju Special Self-Governing Province
(2024.08.21.~23.)
"Thermal Transport Analysis for Improved Simulation in Micro-OLEDs"
- Hongyun So (Invited session)
The Korean Institute of Communications and Information Sciences (KICS) Summer Conference 2024
Ramada PLaza Jeju, Jeju, Jeju Special Self-Governing Province
(2024.06.19.~22.)
"DNN 알고리즘 기반 에너지 절약형 압력 센서의 온도 영향 디커플링 연구"
- Joohyung Bang, Keuntae Baek and Hongyun So (Oral)
"고에너지효율 HVAC 제어를 위한 환자별 공기연령 모니터링 알고리즘 개발"
- Sanghun Shin, Keuntae Baek and Hongyun So (Oral)
20th World Conference on Non-Destructive Testing (20th WCNDT)
Songdo Convensia, Incheon
(2024.05.27.~31.)
"In-situ diagnosis of Li-ion battery state via swelling behavior using 3D printed piezoresistive sponge sensor"
- Joohyung Bang, Keuntae Baek, Byungkwon Chun, Jaeyoung Lim, Yongha Han and Hongyun So (Oral)
2024 General Assembly & Spring Annual Conference of Architectural institute of Korea
Science and Technology Convention Center, Seoul
(2024.04.24.~26.)
"다기능 콘크리트 제작을 위한 나노 물질 간 영향 분석 및 대용량 분산 방법"
- Doheon Koo and Hongyun So (Oral)
2024 Korean Society of Mechanical Engineers (KSME) Reliability Division Spring Conference
Sono Calm Yeosu, Yeosu, Jeollanam-do
(2024.03.20.~22.)
"기계적, 전기적, 열적 원리를 활용한 유량 센서"
- Sanghun Shin, Sangyeun Park, Keuntae Baek, Yeongu Choi and Hongyun So (Poster)
"RDL의 미세회로 선폭이 구리 도금 높이에 미치는 영향 분석"
- Doheon Koo, Sangyeun Park, Yeongu Choi, Junyoung Park and Hongyun So (Poster)
"RDL 공정에서의 기판이 Cu trace에 미치는 영향 분석"
- Sangyeun Park, Doheon Koo, Yeongu Choi, Junyoung Park and Hongyun So (Poster)
"3D 프린팅 기반의 마이크로 구조를 활용한 안정적인 신호를 갖는 정전용량형 압력센서 제작"
- Minhyeok Kim, Sangyeun Park and Hongyun So (Poster)
"구리 전해 도금과 레플리카 몰딩을 활용한 유연 압력 센서 제작"
- Sangyeun Park, Byungkwon Chun and Hongyun So (Poster)
"SWCNT/PEDOT:PSS/TPU 기반 온도센서 제작 및 성능"
- Yeongu Choi, Byungkwon Chun and Hongyun So (Poster)
"3D 프린팅 기술을 이용한 넓은 감지 범위의 유연 압력 센서의 간단한 제작"
- Junyoung Park, Sooheon Kim and Hongyun So (Poster)
2023
The 14th International Symposium on NDT in Aerospace (AeroNDT 2023)
Westin Josun Busan, Busan
(2023.11.05.~08.)
"Burial depth derivation modeling of submarine cable based on thermal simulation"
- Doheon Koo, Daejin Park, and Hongyun So (Oral)
"Thermal effects decoupling system in PEDOT:PSS based sponge pressure sensor using DNN regression"
- Joohyung Bang, Keuntae Baek, Jaeyoung Lim, Yongha Han and Hongyun So (Oral)
"Fabrication of pressure sensor with artificial cilia for prognostics and health management"
- Keuntae Baek, Joohyung Bang and Hongyun So (Oral)
2023 Korean Society of Mechanical Engineers (KSME) Fall Conference
Songdo Convensia, Incheon
(2023.11.01.~03.)
"3D 프린팅과 머신러닝 기반의 공기 유량 측정 장치"
- Sanghun Shin, Keuntae Baek, Yeongu Choi and Hongyun So (Oral)
"가변형 3D 프린팅 적층 패턴을 이용한 다양한 표면 활용 방안 연구"
- Jaebum Sung, Yeongu Choi and Hongyun So (Oral)
"나선 패턴 재널을 이용한 물-기름 액적 제어"
- Doheon Koo and Hongyun So (Oral)
" TPU 를 활용한 점착성 PDMS 제작 및 평가"
- Sangyeun Park, Minhyeok Kim and Hongyun So (Oral)
"딥러닝 알고리즘 기반 압력 센서의 온도 영향 분리 방법"
- Joohyung Bang, Keuntae Baek, Jaeyoung Lim, Yongha Han and Hongyun So (Oral)
"자기장 기반 마이크로 구조를 활용한 압력센서 개발"
- Keuntae Baek, Joohyung Bang and Hongyun So (Poster)
" 3D 프린팅 기술과 탄성 중합체를 이용해 진딧물을 모사한 소프트 그리퍼"
- Jihun Lee and Hongyun So (Oral)
"TDLAS 의 노이즈 기반 가스셀의 최적 광 경로 예측"
- Minyoung Choi, Sun Choi and Hongyun So (Poster)
"Physiologically compatible PVA/MWCNT-based cross-linked self-healed ionic hydrogel for strain sensor application "
- Animesh Sinha and Hongyun So (Oral)
"3D 프린터와 폴리머를 이용한 저온 환경에서 센서의 정상 작동을 위한 초발수 표면"
- Junho Kim and Hongyun So (Poster)
"Real-time water level control system for industrial boilers using object detection models "
- Jongwon Kim, Byungchan So, Hongyun So, Minjun Kwon and Sewon Kim (Poster)
"3D 프린팅 기술 기반의 신축성을 갖는 저항형 히팅 필름 제작"
- Byungkwon Chun, Joohyung Bang, Junyoung Park and Hongyun So (Poster)
"SWCNT/PEDOT:PSS 기반 전도성 고분자 복합체의 제작 및 특성평가"
- Yeongu Choi, Byungkwon Chun and Hongyun So (Poster)
"3D 프린팅 기반의 마이크로 구조를 이용한 정전용량형 압력 센서의 간단한 제작"
- Minhyeok Kim, Sangyeun Park and Hongyun So (Poster)
"3D Printing-assisted single-pair electrode tactile sensor array"
- Junyoung Park, Woojin Chae, Jimin Yoon and Hongyun So (Poster)
"Fabrication of polymer probes for bump damage-free probing test"
- Sooheon Kim, Minhyeok Kim, Hongyun So and Jungki Jo (Poster)
2023 Korean Sensors Society Fall Conference
The Ocean Resort, Yeosu, Jeollanam-do
(2023.10.11.~03.)
"Physiologically compatible PVA/MWCNT-based cross-linked self-healed ionic hydrogel for strain sensor application"
- Animesh Sinha, Doheon Koo and Hongyun So (Poster)
"Fabrication and characterization of wearable heater based on SWCNTs/PEDOT:PSS"
- Yeongu Choi, Byungkwon Chun and Hongyun So (Poster)
International Conference on Precision Engineering and Sustainable Manufacturing (PRESM 2023)
Bankoku Shinryokan, Okinawa, Japan
(2023.07.16.~21.)
"Facile and Rapid Microfabrication for Functional Surface using Variable Resolution Method"
- Jaebum Sung and Hongyun So (Poster)
Korean Society for Prognostics and Health Management 2023 Conference (PHM Korea 2023)
The K Hotel, Seoul
(2023.07.03.~05.)
"열해석을 이용한 해저케이블 매설 깊이 측정 모델 개발"
- Doheon Koo, Jihun Lee and Hongyun So (Oral)
The Society of Air-conditioning and Refrigerating Engineers of Korea 2023 summer annual conference
Yong Pyong Resort, Pyengchang, Gangwon-do
(2023.06.21.~23.)
"A study on the Object Recognition-Based WaterLevel Control System for Industrial Boilers"
- Jongwon Kim, Byeongchan So, Hongyun So, Minjun Kwon and Sewon Kim (Poster)
The Korean Institute of Communications and Information Sciences (KICS) Summer Conference 2023
Ramada Plaza Jeju, Jeju, Jeju Special Self-Governing Province
(2023.06.21.~23.)
"에너지 효율 향상을 위한 질화갈륨 기반 자외선 검출기의 온도 탈동조화 시스템 개발"
- Keuntae Baek, Sanghun Shin, Wanki Park and Hongyun So (Oral)
18th International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2023)
Ramada Plaza Jeju, Jeju, Jeju Special Self-Governing Province
(2023.05.14.~17.)
"Fabrication of Humidity Sensors by Carbon Nanotube, Graphene Oxide and Nanosilica Composite membrane"
- Doheon Koo, Jaebum Sung and Hongyun So (Oral)
65th Korean Society of Combustion Spring Symposium
Saint Johns Hotel, Gangneung, Gangwon-do
(2023.05.11.~13.)
"난류 확산 화염의 화학발광 계측 및 인공지능을 활용한 당량비 예측 모델"
- Sanghun Shin, Minjun Kwon, Sewon Kim and Hongyun So (Oral)
"포토다이오드 기반 화염계측에 대한 실험적 연구"
- Byeongchan So, Jongwon Kim, Hongyun So, Minjun Kwon and Sewon Kim (Poster)
2023 Korean Society of Mechanical Engineers (KSME) Micro/Nano Engineering Division Spring Conference
Pukyong National University, Busan
(2023.05.10.~12.)
"Fabrication of microchannel for fluid direction control using the 3D printer"
- Jaebum Sung, Doheon Koo and Hongyun So (Poster)
"Fabrication of micro-textured surface using viscosity control method under magnetic field"
- Keuntae Back, Joohyung Bang and Hongyun So (Poster)
"Micro-Heater with Hydrophobic Surface for Stable Operation in Low-Temperature Environment"
- Junho Kim and Hongyun So (Poster)
"파장 가변 레이저 흡수 분광법을 사용한 수증기 농도 측정"
- Minyoung choi and Sun Choi (Poster)
2023 Korean Society of Semiconductor & Display Technology Spring Conference
Jeju National University, Jeju, Jeju Special Self-Governing Province
(2023.05.10.~11.)
"탄소 나노튜브, 나노 실리카, 산화그래핀 혼합 막을 활용한 습도 센서 제작"
- Doheon Koo, Jaebum Sung and Hongyun So (Poster)
"PCB 기반 상부 RDL 제작을 위한 전해도금 구리 패턴 제어에 관한 연구"
- Sanyeun Park, Doheon Koo, Yeongu Choi and Hongyun So (Oral)
- 우수 논문상 수상
"3D 프린팅을 통한 자연 모사 습기 포착 표면"
- Yeongu Choi, Keuntae Baek and Hongyun So (Oral)
2023 Society of Micro and Nano Systems - Korean MEMS Conference (KMEMS)
Jeju Booyoung Hotel, Seogwipo, Jeju Special Self-Governing Province
(2023.03.22.~24.)
"고분자 경화 조건에 따른 계면간 영향 분석 및 활용 방안 개발"
- Jaebum Sung and Hongyun So (Poster)
"Fabrication of water harvesting surface using 3D printing and biomimetic technology"
- Yeongu Choi, Keuntae Baek and Hongyun So (Poster)
2023 Korean Society of Mechanical Engineers (KSME) Reliability Division Spring Conference
Jeju Oriental Hotel, Jeju, Jeju Special Self-Governing Province
(2023.03.22.~24.)
"화염 광계측과 인공신경망을 활용한 연소 모니터링 시스템 개발"
- Sanghun Shin, Minjun Kwon, Sewon Kim and Hongyun So (Oral)
- 우수 논문상 수상
"3D 프린팅 표면 패턴이 물-기름 액적 생성에 미치는 영향 분석"
- Doheon Koo and Hongyun So (Poster)
- 우수 논문상 수상
"Fabrication and characteristics of adhesive PDMS film using TPU material"
- Sangyeun Park, Minhyeok Kim and Hongyun So (Poster)
- 우수 논문상 수상
"Fabrication of high sensitivity pressure sensor in the ultra-low pressure range using FDM-type 3D printing layer based creaks"
- Byungkwon Chun, Joohyung Bang and Hongyun So (Poster)
- 우수 논문상 수상
7th IEEE Electron Devices Technology and Manufacturing Conference
COEX, Seoul
(2023.03.07.~10.)
"Respiration Sensor Embedded in a Mask for Mouth Breathing Detection"
- Jihun Lee, Junho Kim, Ji-Yong Moon, Seok Hyun Cho and Hongyun So (Poster)
2023 Korean Institute of Communications and Information Sciences Winter Conference
Yong Pyong Resort, Pyengchang, Gangwon-do
(2023.02.08.~10.)
"화학발광을 이용한 화염 계측 및 인공지능 기반의 당량비 예측"
- Sanghun Shin, Minhun Kwon, Sewon Kim and Hongyun So (Oral)
"농경지 부족 문제 해결을 위한 친환경 식물 재배 시스템 연구"
- Sangyeun Park, Junha Jang, Sangjun Ko, Wanki Park and Hongyun So (Oral)
"SCR 촉매 및 장비 고장을 예방하기 위한 NOx 가상센서 개발"
- Keuntae Baek, Minhyeok Kim, Wanki Park and Hongyun So (Oral)
2022
2022 Korean Institute of Communications and Information Sciences Fall Conference
Lahan Select Hotel, Gyeongju, Gyeongsangbuk-do
(2022.11.16.~18.)
"3D 프린팅 기술을 이용한 마찰전기 기반 자체 구동 풍속 센서"
- Byeongchan So, Junho Kim, Wanki Park and Hongyun So (Oral)
2022 Korean Society of Mechanical Engineers (KSME) Fall Conference
International Convention Center Jeju, Seogwipo, Jeju Special Self-Governing Province
(2022.11.09.~12.)
"FCN 기반 딥러닝 모델을 활용한 실내 공기 연령 예측 알고리즘 개발"
- Sanghun Shin, Keuntae Baek and Hongyun So (Oral)
"고분자의 경화 농도와 온도 차이를 통한 계면 내 특성 분석 및 다양한 활용 방안 개발"
- Jaebum Sung and Hongyun So (Oral)
"탄소 나노튜브의 표면 성질에 따른 수용액 내 분산도에 관한 연구"
- Doheon Koo, Jaebum Sung and Hongyun So (Poster)
"자기 제어 판형 어레이 구조를 이용한 액적 제어"
- Sangyeun Park and Hongyun So (Oral)
"DLP 프린터의 레진 점성을 활용한 발수 표면 연구"
- Byeongjo Ko and Hongyun So (Poster)
"Flexible Lattice-sponge based high-performance piezoresistive sensor"
- Joohyung Bang and Hongyun So (Oral)
- 우수 논문상 수상
"Decoupling systems of GaN UV detector to separate thermal effects"
- Keuntae Baek, Sanghun Shin and Hongyun So (Poster)
- 우수 논문상 수상
"3D 프린팅 기술을 이용한 가역적인 열 반응성 접착 패드 제작"
- Jihun Lee and Hongyun So (Poster)
"3D 프린팅 기술을 이용한 생체 모방 단방향 수송 표면의 성능 분석"
- Minyoung Choi, Sangyeun Park, Sun Choi and Hongyun So (Poster)
- 우수 논문상 수상
"Fabrication of programmable-crack based pyramidal pressure sensor using 3D printing technology"
- Byungkwon Chun, Joohyung Bang and Hongyun So (Poster)
"Fabrication of water harvesting surface using 3D printing method"
- Yeongu Choi, Keuntae Baek and Hongyun So (Poster)
"Fabrication of transforming film for water collection inspired by structure of butterfly wings"
- Minhyeok Kim, Sangyuen Park and Hongyun So (Poster)
"Anti-Reflux Diode Inside Ureter Stent Using 3D printer and Elastomer"
- Junho Kim, Jihun Lee, Byeongchan So, Jungki Jo and Hongyun So (Poster)
2022 Architectural Institute of Korea Fall Conference
Jeju Island, Phoenix Seopjikoji
(2022.10.26.~28.)
"시멘트의 성능 향상을 위한 탄소 나노튜브 분산 특성 연구"
- Jaebum Sung, Doheon Koo and Hongyun So (Poster)
2022 Korean Institute of Communications and Information Sciences Summer Conference
Grand Hyatt Jeju, Jeju, Jeju Special Self-Governing Province
(2022.06.22.~24.)
"3D 프린팅 및 인공지능 기반 유량센서 제작 방법"
- Sanghun Shin and Hongyun So (Oral)
- 한국전자기술연구원 원장상 수상
"저온 환경 내 센서 가동범위 증대를 위한 얼음 형성 지연 표면 제작"
- Keuntae Baek and Hongyun So (Oral)
"3D 프린터를 이용한 동심원 무늬 기반 압력센서 제작 및 성능평가"
- Jihun Lee, Wanki Park and Hongyun So (Oral)
2022 Korean Society of Mechanical Engineers (KSME) Micro/Nano Engineering Division Spring Conference
Pukyong National University, Busan
(2022.05.18.~20.)
"3D printing assisted fabrication of micro wall arrays for droplet control using magnetic fields"
- Sangyeun Park, Joohyung Bang and Hongyun So (Poster)
"Microfabrication of magnetically responsive and switchable wettability surface using 3D printing technology"
- Joohyung Bang, Sangyeun Park and Hongyun So (Poster)
"3D 프린팅 기술 기반 생체 모방 단방향 액체 수송 표면 제작"
- Minyoung Choi, Sangyeun Park and Hongyun So (Poster)
2022 Korea Institute for Structural Maintenance and Inspection Spring Conference
Gwangju, Kimdaejung Convention Center
(2022.04.06.~08.)
"다기능 콘크리트 제작을 위한 나노 물질 간 영향 분석 및 분산 최적화"
- Jaebum Sung, Doheon Koo and Hongyun So (Oral)
2022 Korean Society of Mechanical Engineers (KSME) Reliability Division Spring Conference
Jeju Oriental Hotel, Jeju, Jeju Special Self-Governing Province
(2022.04.22.~24.)
"3D 프린팅과 얇은 폴리머 막을 활용한 간단한 유량센서 제작 방법"
- Sanghun Shin and Hongyun So (Poster)
"3D 프린팅 표면 패턴을 이용한 물-기름 동축류 채널 제작"
- Doheon Koo and Hongyun So (Poster)
- 우수 논문상 수상
2021
2021 Korean Society for Precision Engineering (KSPE) 2021 Autumn Conference
BEXCO, Busan
(2021.11.24.~26.)
"농도비와 경화 온도를 이용한 고분자 기반 탄성 퓨즈 시스템 제작"
- Jaebum Sung and Hongyun So (Poster)
6th International Conference on Advanced Electromaterials (ICAE)
Ramada Plaza Hotel, Jeju, Jeju Special Self-Governing Province
(2021.11.09.~12.)
"Facile Fabrication of Pressure Sensor with Regular Concentric Circle Patterns Using a 3D Printer"
- Jihun Lee and Hongyun So (Poster)
"Facile Fabrication of Soft Inclinometer Using 3D Printing Method"
- Keuntae Baek, Joohyung Bang and Hongyun So (Poster)
2021 Korean Society of Mechanical Engineers (KSME) Fall Conference
Kimdaejung Convention Center, Gwangju
(2021.11.03.~05.)
"국소적 온도 데이터를 활용한 딥러닝 기반의 열화상 이미지 예측 및 온도 모니터링 방법"
- Sanghun Shin, Byeongjo Ko and Hongyun So (Oral)
"3D 패턴이 구현된 열팽창 퓨즈 특성 분석"
- Byeongjo Ko, Sanghun Shin and Hongyun So (Poster)
"Fabrication of wedge-shaped single membrane water-oil separator"
- Sangyeun Park, Jaebum Sung and Hongyun So (Poster)
"3D 프린팅 기술로 형성된 점진적으로 변화하는 미세구조를 활용한 압전저항유형의 굽힘 센서 제작"
- Jihun Lee and Hongyun So (Poster)
"Fabrication of particle sorting lattice surface using 3D printing method"
- Joohyung Bang, Keuntae Baek, Jaebum Sung and Hongyun So (Poster)
"Electrical characterization of lattice-structured chemical sensor"
- Minyoung Choi, Joohyung Bang, Keuntae Baek and Hongyun So (Poster)
2021 Korean Concrete Institute Fall Conference
Hwabaek International Convention Center, Gyeongju, Gyeongsangbuk-do
(2021.11.03.~05.)
"삼중 나노소재 최적 분산 방안 및 최적 배합비 도출 연구"
- Jaebum Sung, Doheon Koo and Hongyun So (Oral)
2021 Korean Sensors Society Fall Conference
Lacaisandpine Resort, Gangneung, Gangwon-do
(2021.10.28.~30.)
"Multifunctional capacitive flow sensor for human respiratory monitoring"
- Sanghun Shin, Gahui Park, Whoiyul Kim and Hongyun So (Poster)
2021 Korean Society of Mechanical Engineers (KSME) Reliability Division Spring Conference
Jeju Oriental Hotel, Jeju, Jeju Special Self-Governing Province
(2021.04.28.~30.)
"3D 프린팅 기술을 이용한 하이브리드 표면 제작"
- Jaebum Sung, Hoo Min Lee, Gil Ho Yoon and Hongyun So (Poster)
"3D 프린팅 기술을 이용한 미세 무늬 초 소수성 표면 제작"
- Sangyuen Park, Jaebum Sung and Hongyun So (Poster)
"3D 프린터로 제작한 역류방지 요관다이오드의 체외 성능 실험"
- Jihun Lee, Jaebum Sung, Jungki Jo and Hongyun So (Poster)
- 우수 논문상 수상
"3D 프린팅 기반의 격자 구조를 이용한 용매 감지 화학센서 제작"
- Minyoung Choi, Joohyung Bang, Keuntae Baek and Hongyun So (Poster)
The Society of Micro and Nano Systems - The 23th Korean MEMS (KMEMS) Conference
Lotte Resort, Buyeo, Chungcheongnam-do
(2021.04.07.~09.)
"3D 프린터를 활용한 크랙 기반 고성능 스트레인 게이지의 간단한 제작 방법"
- Sanghun Shin and Hongyun So (Poster)
"신축성 있는 폴리머 막 전극을 이용한 열팽창 액추에이터의 제작과 성능 검증"
- Byeongjo Ko, Sanghun Shin and Hongyun So (Poster)
"레이저 어블레이션을 이용한 거친 3D 프린팅 필라멘트 제작"
- Seungmin Seo, Sanghun Shin and Hongyun So (Poster)
2020
The Society of Micro and Nano Systems - The 22th Korean MEMS (KMEMS) Conference
Phoenix Park, Pyeongchang, Gangwon-do
(2020.08.19.~21.)
"마이크로히터를 이용한 질화갈륨 자외선 센서의 감쇠 시간 단축 방법에 관한 연구"
- Sanghun Shin, Jaebum Sung and Hongyun So (Poster)
"Fabrication of multifunctional porous polymer filter using charcoal particles"
- Jaebum Sung and Hongyun So (Poster)
"3D 프린팅 기술을 이용한 자연모사 표면 제작"
- Sanghu Han and Hongyun So (Poster)
2020 Korean Society of Mechanical Engineers (KSME) Reliability Division Spring Conference
Jeju Oriental Hotel, Jeju, Jeju Special Self-Governing Province
(2020.07.15.~17.)
"Microfabrication of non-sticky surface using 3D printing technology"
- Jaebum Sung and Hongyun So (Poster)
- 우수 논문상 수상
"Fabrication of 3 dimensional micro-mixer with different mixing-efficiency as printing angle of 3D printer"
- Doheon Koo, Sanggyu Kim, Seojin Park and Hongyun So (Poster)
"Fabrication and characterization of micro drill using 3D printing technology"
- Sangyeun Park, Byeongjo Ko, Heewon Lee and Hongyun So (Poster)
2019
5th International Conference on Material and Reliability (ICMR)
Masion GLAD Jeju, Jeju, Jeju Special Self-Governing Province
(2019.11.27.~29.)
"Multifunctional Polymer Lens for Optical Enhancement of GaN Photodetectors"
- Sanghun Shin and Hongyun So (Oral)
- Best Paper Award
"Measurement of Continuous Water-level Using Gallium Nitride Ultraviolet sensor"
- Jaebum Sung and Hongyun So (Oral)
2019 Korean Society of Mechanical Engineers (KSME) Micro/Nano Engineering Division Spring Conference
Pusan National University, Busan
(2019.05.22.~24.)
"Microfabrication of Cone-shaped Structures for Operation of GaN UV Photodetector at Low Temperature"
- Sanghun Shin and Hongyun So (Poster)
- 포토콘테스트 수상
"Microfabrication of symmetric molds for ultraviolet detection"
- Jaebum Sung and Hongyun So (Poster)
2018
2018 Korean Society of Mechanical Engineers (KSME) Fall Conference
Kangwon Land, Jeongseon, Gangwon-do
(2018.12.12.~15.)
"Fabrication of eyeball for omnidirectional UV sensing using 3D printing"
- Jaebum Sung, Sanghun Shin and Hongyun So (Poster)
2018 Korean Society of Mechanical Engineers (KSME) Reliability Division Spring Conference
Jeju National University, Jeju, Jeju Special Self-Governing Province
(2018.02.21.~23.)
"Microfluidic diode using moving plug for rectifying ultra-low Reynolds number flows"
- Jini Hyeon, Sanghun Shin, Doheon Koo, Wooseok Seo, Jengdu Choi and Hongyun So (Poster)
- 우수 논문상 수상
Page updated
Google Sites
Report abuse